Page Comparison

The Admission Screen in VetView has two parts:  The Admission Search Screen and the individual Pre-Admission Screen or PA screen that is created for every episode for a patient.

Admission Search Screen

The Admission Search Screen is accessed by clicking on the Admission button on the header bar.  

This screen has two sections:  The Admission Search options at the top, and the Search Results at the bottom.  You can also create a New Admission by clicking on the button at the very top.

Admission Search Parameters

All of the search parameters can be used in conjunction with one another.  For example, you can search for a specific PA if you know the patient's case number and the date.  Or you can search for a cluster of episodes, such as all the canines that were seen in the year 2020, or all the currently open episodes for one particular unit.  The total count of episodes appears in the upper right hand corner of the Search Results.  This search screen is also helpful for research when identifying episodes for patients based on keyword, breed, etc.

Click on the Search button to load results matching the parameters.  To clear out any parameters and start over, click on the Reset button.

Set Default Search

If you frequently search for a specific set of parameters, you can click on Set Default Search to save those settings.  They will load on this screen the next time you return.  You can also click on Remove Defaults to clear out the previous settings.

Admission Search Results

The results will load in the bottom half of the screen.  The PA#, Case No, Patient ID, and Contacts are all hot links to other screens in the system.   Use CTRL+Click to open these in a new tab if you don't want to lose your results.

New Admission / Pre-Admission Screen

If you click on the New Admission button at the top of the screen, a blank PA Screen will load.  If you click on the PA# field on a row of the Search Results, then PA Screen that was filled out for that episode will load, with all the data already included.

Filling out a blank PA

The New Admission screen loads with everything empty.  However, if your patient and client already exist in the system, they can be added to the PA without filling out the information again.

The PA screen is divided into several sections.  At the top are the patient contacts, in the form of mock index cards.  The admission details include the admitting unit and appointment type, the main reason that the patient is being seen, and options such as Field Service or ASAQ (Montreal only.)  Below this section is a section for Personnel, Appointments, and Reminders.

Image Removed

Add Patient 

Click on the green plus sign on the Patient Card to open up the new patient form.   This form also doubles as patient search on this screen, for any existing patients.

Start searching for the Patient Name and Species.  If too many results match, then you can enter in a client's name in the Search by Client Record field to limit the results.  Matches will appear on the right hand side of this window, in the Search Results column.  Double click on a match to add it to the PA.  Note that matches for deceased patients will appear with a black background.

Image Removed

If none of the existing patients and clients match, you can fill out the rest of the form with the new patient's information, and then click on Save to add the new patient. 

Image Removed

Once Saved, the PA Screen will reload, and the patient's information will appear in the Patient card on the top part of the screen.

Image Removed

Add Owner

Adding the new patient's Owner is similar.  Click on the small green plus sign on the Owner card to open up the contact search form.

Enter in the owner's name and other parameters to see if they are already in your system, such as the phone number.  Possible matches will appear on the right hand side.  

Image Removed

Note that the Search Results on the right hand side are weighted, and all fields that match may appear.  Be sure to scroll through and confirm if there is a match at the bottom of the list.

If there is no match, fill out the rest of the client's information and then click on the Save button to add the new owner into the system.

Image Removed

Add RDVM and Clinic

The Referring DVM and Referring Clinic are optional on a new PA.  You can add them to the PA if the RDVM has sent the patient to your hospital for a specialty service, and this allows you to send them automated updates as the episode progresses.  

Image Removed

Click on the green plus sign to open up the RDVM or Clinic Search windows.

The search is similar to the Owner search window, with the addition of a new panel on the left hand side for any prior associations for your owner, the RDVM, or the clinic.  Prior associations can be doubled clicked to add, just like the matching search options on the right hand side.

If there are no matches, fill out the information and click on the Save button to add the new RDVM or Clinic to the system.

Image Removed

Edit Patient, Owner, RDVM, or Clinic after they are added

To edit the demographic information of the patient or any of the contacts on the PA, click on the pencil icon on the contact card.

Image Removed

For patients, this will reopen the standard Add Patient window with their existing information already filled in.

For Owners, RDVMs, and Clinics, it will open up a Communications Method window instead.  This allows you to add the contact methods and indicate whether they should receive any owner or RDVM communications through that method.

Image Removed

Click on the pencil icon to edit the selected type of contact.  For example, the Mailing Address window will open like this.  Fill out the information, and click on Save to add the method.

Image Removed

You can indicate what communications should be sent to this method.  An RDVM may want to have their medical record communications faxed, but have their accounting information sent to a physical mail addressed instead.

Image Removed

Set RDVM or Clinic as Primary

The referring DVM and clinic are not assumed to be the primary for the patient when they are first added.  (For example, the patient may have been referred from another emergency clinic, not their usual DVM.)

Click on the small icon on the right side of the card to set the contacts as the primary for this patient.  The icon will change from grayscale to color to indicate the primary flag has been assigned.

Image Removed

Add Alert to Patient, Owner, RDVM, or Clinic

Click on the icon that looks like a yield sign with a small green plus on it to add a new alert or comment.  These alerts will follow the patients or contacts throughout the system.

Image Removed

Other Icons on the Contact Cards

Image Removed