Overview

Provides the ability to create, and assign Default Products to, Patient Locations for a Hospital Units.

Click the 'Navigation' button on the VetView button bar at the top of the screen.
Click the 'Hospital Setup' hyperlink.
Click here to expand...

The availability of menu items is controlled by privileges that are assigned to each user, so the 'Navigation Menu' will not look the same for all users.
The 'Hospital Setup' screen will open.
Click here to expand...
Select the 'Hospital' from the drop-down list.
Select the 'Unit Setup' tab.
Select the 'Unit', to be configured as an Inventory Area, from the list of Hospital Units.
Select the 'Unit Locations' subtab.

VetView Wiki

Most recent releases of VetView: Version 5.0.4 (Released 3/10/2025) and 4.2.10 Hotfix (2/28/2025)

This page may contain functionality not found in the current version of VetView.

Contents

Screen

This is the Patient Locations subtab.

Mockups

Following is a list of mockups for this screen:

Click here to expand...

Specs

Fields and Controls

The following table lists all of the fields and controls found on this screen. The fields and controls are grouped by their location on the screen; for example, buttons on a 'section' or columns in a 'data grid'. Use the controls at the top of the table to change the sort, grouping, and row height. To see more of the cell content, click on the cell expansion control located at the top-right corner of a selected cell.

Privileges

Definitions

How To...

Setup Patient Locations for a Hospital Unit

Click here to expand...

Navigate to the 'Hospital Setup' screen.
Select the 'Hospital' from the drop-down list.
Select the 'Unit Setup' tab.
Select the 'Unit'.
Click here to expand...
Select the 'Patient Locations' subtab.
Click here to expand...
Select an existing location.
Click the 'Edit' button; or,
Click the 'Add' button to add a new location.
Select the 'Default' option for one of the locations.
Click the 'Save' button save your changes.
In order for the location to appear in drop-down lists, the 'Active' option must be checked.
When the 'Default' option is checked, the selected location will be used as the default location when inventory is auto-received. All Inventory Areas that wish to Auto-Receive Inventory must have a 'Default Inventory Location'.
When the 'Hide from Transfer' option is checked, the inventory held in the Inventory Location will not be available on the 'Inventory Transfer' screen.

Setup Requirements

The Inventory Transfer Receiving functionality is not currently available; therefor, each Hospital Unit that is designated as an Inventory Area, must also be set to 'Auto Receive Inventory'.

Each Inventory Area must also be assigned a 'Default Inventory Location'.

Planned Improvements

key	summary	status

Loading...

Refresh

Bugs

key	summary	status

Loading...

Refresh

Open Issues

Click to expand ...

key	summary	type	priority	status	fixversions	components

Loading...

Refresh

Browser not supported