Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Hospital Unit Inventory Options are configured via the ‘Hospital Setup' screen → 'Unit Setup' tab → 'Unit Details’ subtab.

To Configure the Hospital Unit as an Inventory Area:

  1. Navigate to the ‘Hospital Setup’ screen → ‘Unit Setup’ tab.

    'Hospital Setup' screen - 'Unit Setup' tab - 'Unit Details' subtab

  2. Select the Hospital Unit (Inventory Area).

  3. In order for a Hospital Unit to be available when Managing Inventory, it must be identified as an ‘Inventory Unit’ (Inventory Area).

  4. Inventory Areas may be configured to ‘Auto-Receive Inventory'.

    1. If an Inventory Area Auto-Receives Inventory, the ‘Auto Stock’ option will be available when completing a Purchase Order Delivery.

      'Purchase Order Details' screen - 'Complete Delivery' dialog

  5. When Inventory is Auto-Received,

    1. If the Product has been previously received, the Inventory Area of the most recent Stocking, will be used.

    2. If the Product has not been previously received, the ‘Default Inventory Location’ for the Inventory Area, will be used.


Inventory Area Configuration Options:

  1. Inventory Locations - Refer to Configure Inventory Locations.

  2. Elevated Privileges - Refer to Configure Inventory Elevated Privilege

  3. Purchase Order Defaults - Refer to ** Configure User Purchase Order Defaults

  • No labels